Straight Hydraulic Pipe Adapters With JIS Male And BSPT Male Thread OEM Service

JIS Male and BSPT Male thread hydraulic Fittings by carbon steel
 
Hydraulic Hose Fittings:
1). BSP male, female fitting, straight & elbow, nuts, ferrules
2). JIC male, female fitting, straight & elbow, nuts, ferrules
3). NPT male, female fitting, straight & elbow, nuts, ferrules
4). ORFS male, female fitting, straight & elbow, nuts, ferrules
5). SAE male, female fitting, straight & elbow, nuts, ferrules
6). Metric male, female fitting, straight & elbow, nuts, ferrules
 
7). Reusable fittings
8). One-piece fittings
Hydraulic Adaptors:
1). BSP male, female adaptor, 3 ways tee 4 ways tee
2). JIC male, female adaptor, 3 ways tee 4 ways tee
3). NPT male, female adaptor, 3 ways tee 4 ways tee
4). ORFS male, female fitting, straight & elbow, nuts, ferrules
5). SAE male, female fitting, straight & elbow, nuts, ferrules
6). Metric male, female fitting, straight & elbow, nuts, ferrules
 
Couplers and clamps:
European / American / Austraulia type camlock, pin-plug and clamps for large size hoses with NPT, BSP thread.
Stainless Steel (316SS / 304SS) & Brass & aluminum fittings:
NPT,JIC,BSP etc threaded male and female fittings & adaptors for low & high pressure
Note:Special dimension and other standard fitting are available under customers requirements.And OEM/ODM is welcomed.
 
Product Description

 

 
Thread eccentricity tolerance:
 
2A of the external thread and the thread of the modified 2B various elements, the concentricity of the joint
 
does not exceed the following limit
 
External thread
 
When the diameter is the largest and the largest diameter, the two thread elements must be concentric,
 
however, if the size is not round, the size is small, in the non round point, the diameter and diameter will
 
produce deviation
 
In the middle of the smallest, the largest diameter, the two elements of the total runout can not be greater
 
than the middle diameter tolerance;
 
The diameter of the largest, the largest diameter of the hour, the two elements of the eccentricity of the
 
full jump is not greater than the large diameter tolerance;
 
The diameter of the smallest, the largest diameter of the hour, the two elements of the total runout can
 
not be greater than the diameter of the tolerance tolerance
 
Internal thread
 
The smallest diameter, small diameter (minor diameter) the shortest, the two should be concentric, if the
 
path is not round or too large, the two elements of the total runout can not be greater than the size of the
 
path tolerance;
 
The maximum diameter of the path, the shortest path, the two elements of the eccentricity of the total
 
runout should not be greater than the median diameter tolerance
FAQ
1. Are you a manufacture?
A: Yes, we are a manufacture with rich experience.
2. Can I visit your factory ?
A: Its welcome! The nearest airport is jieyang airport.
3. Can you add my logo on the product?
A: Yes, customized logo are welcome. OEM and ODM is OK for us.